Enabling The Screen Saver; Disabling The Screen Saver; Setting Or Changing A Password; Disabling Password Protection - Fujitsu KVM s2-0411 Bedienungsanleitung

3.5.6.3

Enabling the screen saver

Press Print Screen. The Main window opens.
Click Setup - Security. If a password is set, the Password window opens. Type the
password and click OK.
Select the Enable Screen Saver check box.
In the Inactivity Time field, type the number of seconds (1 through 99) that must
elapse before the screen saver starts.
If the monitor is Energy Star compliant, select Energy; otherwise, select Screen.
(Optional) To run the screen-saver test, click Test. The screen-saver test runs for
10 seconds.
Click OK.
3.5.6.4

Disabling the screen saver

Press Print Screen. The Main window opens.
Click Setup - Security. If a password is set, the Password window opens. Type the
password and click OK.
Clear the Enable Screen Saver check box.
Click OK.
A password must contain both alphabetic and numeric characters and can be up to 12
characters long. Passwords are case-sensitive. Valid characters are A through Z, a
through z, 0 through 9, space, and hyphen.
3.5.6.5

Setting or changing a password

Press Print Screen. The Main window opens.
Click Setup - Security. If a password is already set, the Password window opens.
Type the password and click OK.
Double-click the New field.
In the New field, type the new password.
In the Repeat field, type the password again.
Click OK.
3.5.6.6

Disabling password protection

Press Print Screen. The Main window opens.
Click Setup - Security. In the Password window, type the password and click OK.
Double-click the New field. Leave the field blank, and press Enter.
Double-click the Repeat field. Leave the field blank, and press Enter.
Click OK.
590-595-609D
Setting the keyboard country code
25