Basic Operations; Controlling The Switching System From The Analog User Port; Starting The Oscar Interface - Fujitsu KVM s2-0411 Bedienungsanleitung

3

Basic operations

3.1 Controlling the switching system from the
analog user port
The KVM s2-0411 appliance has PS/2 keyboard and mouse ports on the rear panel that
you can use to connect a PS/2 keyboard and mouse for direct analog access. The
appliance uses the OSCAR interface, which has menus to configure the switching
system and select target devices.
3.2

Starting the OSCAR interface

You can view, configure, and control target devices in the switching system from the
OSCAR interface from a KVM connection to the analog user port.
To start the OSCAR interface, press Print Screen.
Alternatively, you can press the Control, Alt, or Shift key twice within 1
second to start the OSCAR interface. You can use any of these key
sequences instead of pressing Print Screen in any procedure in this
document. To specify which key sequences can be used to start the
OSCAR interface, click Setup - Menu.
The following illustration is an example of the Main window of the OSCAR interface.
Figure 6: Example of a Main window
590-595-609D
13