Power Supply - PeakTech 2035 Bedienungsanleitung

Max. Input voltage
X-Y Operation
X-axis
Y-axis
X-Y Phase Difference
Calibrator (Probe Adjustor)

Power Supply

Frequency
Power Consumption
Environmental Charac.
Temperature range
for rated operation
Max. ambient operating
temperature
Max. storage temperature
Humidity range for rated
operation
Max. ambient operating
humidity
Safety
EMC
Weight/Dimension
Weight
Dimension
Accessories
Caution: Sources like small hand-held radio transceivers, fixed station radio and television transmitters,
vehicle radio transmitters and cellular phones generate electromagnetic radiation that may induce
voltages in the leads of a test probe in such cases the accuracy of the oscilloscope cannot be guaranteed
due to physical reasons. Using the 8 div scale, the oscilloscope radiation can be exceeded the limit.
400 V DC + peak value AC
(Same as CH 1 except for the following)
Deflection Factor: Same as of CH 1
Accuracy: ± 5 %
Frequency Response: DC to 500 kHZ (-3 dB)
Same as CH 2
3° or less (up to 50 kHz in DC)
approx. 1 kHz ± 20 %, 0.5 V (± 10 %) square wave duty ratio:
40 ~60%
Voltage range
115 V (98 – 125 V) AC 1.25 A
230 V (198-250 V) AC 0,63 A
50/60 Hz
approx. 45 W
+10° C to + 35° C (+50° F to +95° F)
0° C to +40° C (+32° F to 104° F)
-20° C to +70° C (-4° F to 158° F)
45 % to 85 % RH
35 % to 85 % RH
EN 61010-1 overvoltage CAT II, degree of polution 2
Interference: EN 50081-1
Susceptability: EN 50082-1, IEC801-2, 3, 4
7,8 kg
316 mm (W) x 132 mm (H) x 410 mm (L)
1 x Operation manual
2 x probes
1 x spare fuses
1 x power cord
- 32 -
Fuse (250 V)
UL 198 G IEC 127
1.25 A
0,63 A