Introduction; Instruction; Specifications - PeakTech 2035 Bedienungsanleitung

Caution and warning statements
CAUTION Is used to indicate correct operating or maintance procedures in order
to prevent damage or destrution of the equipment or other property
WARNING Calls attention to a potential danger that requires correct procedures or
practices in order to prevent personal injury.
Symbols
Caution (refer to accompanying documents) and Warning
protective ground (earth) symbol
1.

Introduction

Thank you for purchasing this product. This oscilloscope is a high technical product made under strict
quality control. We guarante their exceptional precision and utmost reliability. For proper use of the
proudct please read this user manual carefully.
1.1 Instructions
1. To maintain the precision and reliability of the product use it in the standard setting (temperature
10°
to 35° centigrade, humidity 45 - 85 %).
2. After turning on power, please allow a 20-minute pre-heating period before use.
3. Triple-line power cord is to be used for the product. But when you are using the doubleline cord,
make sure for safety.
4. For quality improvement the exterior design and specifications of the product can be changed
without prior notice.
5. If you have further questions concerning use, please contact your dealer.
1.2

Specifications

CRT
Configuration
Effective Surface
Accelerating Potential
Phosphor
Focussing
Trace rotation
Intensity Control
Z-Axis input (Intensity Modulation)
Input signal
Band width
Coupling
Input impedance
6-inch rectangular tube with internal gratitude;
8 x 10 division (1 div. = 1 cm), marking for measuring rise and fall time.
control axis is graduated in 2 mm subdivisions.
approx. +1.9 kV DC (Cathode basis)
P31 (Standard)
possible
provided
provided
Positive going signal decreases intensity +5 V
noticeable modulation at normal intensity settings.
DC-2 MHz (-3 dB)
DC
20 k - 30 kΩ
- 30 -
or more signal cases
pp