Seite 1
TK-60/TK-100/TK-250/TK-250/100 Bedienungsanleitung Oszilloskop - Tastköpfe...
Seite 2
Einführung Die passiven hochohmigen Tastköpfe TK-60, TK-100, TK-250 und TK- 250/100 sind ab Werk zum Anschluss an Oszilloskope mit einer Eingangsimpedanz von 1 MΩ, 20 pF abgeglichen. Mit dem am Tastkopf befindlichen Trimmer kann der Tastkopf jedoch auch an Oszilloskope mit Eingangskapazitäten von 10...30 pF angeglichen werden.
Seite 3
Bandbreite DC bis 60 MHz (P TK-60) DC bis 100 MHz (P TK-100) DC bis 250 MHz (P TK-250) Anstiegszeit 5,8 ns (TK-60); 3,5 ns (TK-100); 1,4 ns (TK- 250) Eingangswiderstand 10 MΩ (TK-60, TK-100, TK-250) Eingangskapazität ca. 18 pF (TK-60), ca. 13 pF (TK-100, TK-...
Seite 4
1500 V CAT II (2000 V DC o. AC abnehmend mit steigender Frequenz Zubehör: Kanalerkennungsklemme PA-105; Federkraft-Klemme PA-106; Massekabel PA-107; Isolierspitze PA-108; Messspitze PA-102 (außer P TK-60,); IC-Spitze PF-902; Abgleichwerkzeug PF-903; BNC Adapter PF-901 (nur P TK-250 u. TK-250/100) Spannungs-/Frequenzkenndatentabelle...
Seite 6
TK-60/TK-100/TK-250/TK-250/100 Operation manual / Oscilloscope probes...
Seite 7
10-35 pF. The probe incorporates a three position slide switch in the head, which ® selects attenuation of x1, x10 or a ground reference position (not PeakTech TK-250/100) Safety instructions This probe has been designed for use on low energy systems only as defined in category II of EN 61010-031.
Seite 8
Rise time 58 ns Input Resistance 1 MΩ (Oszcilloscope-Input) 128 pF + Oscilloscope capacitance (TK-60) Input Capacitance 47 pF + Oscilloscope capacitance (TK-100) 47 pF + Oscilloscope capacitance (TK-250) 300 V CAT I, 150 V CAT II (DC or AC max.
Seite 9
Accessories: Channel Identifier Clip PA-105; Sprung Hook PA-106; Ground lead PA-107; Insulating Tip PA-108; Measuring Tip PA-102 (excl. TK-60); IC Tip PF-902; Adjusting Tool PF-903; BNC Adaptor PF-901 (only P TK-250 and TK- 250/100). Voltage derating curve...
Seite 11
TK-60/TK-100/TK-250/TK-250/100 Mode d’emploi Sondes d’oscilloscopes...
Seite 12
2 sondes et une sonde différentielle. Position REF Les kits de sonde pour oscilloscopes TK-60, TK-100, TK-250 sont équipés d’une position de référence. La sonde est découplée et l’entrée de l’oscilloscope est appliquée à la masse.
Seite 13
DC jusqu’à 60 MHz (P TK-60) Largeur de bande DC jusqu’à 100 MHz (P TK-100) DC jusqu’à 250 MHz (P TK-250) 5,8 ns (TK-60); 3,5 ns (TK-100); 1,4 ns (TK- Temps de montée 250) Résistance d’entrée 10 MΩ (TK-60, TK-100, TK-250) env.
Seite 14
Borne d’identification de canal PA-105; borne à ressort PA-106; cordon de masse PA-107; pointe isolante PA-108; pointe de la sonde PA-102 (sauf P TK-60,); pointe IC PF-902; outil d’équilibrage PF-903; adaptateur BNC PF- 901 (seulement pour P TK-250 etTK-250/100) Tableau de caractéristiques de tension/fréquence...