PeakTech 2035 Bedienungsanleitung Seite 33

Maximum input voltage
Vertical Deflection
Band width (-3 dB)
DC coupled
AC coupled
Modes
Deflection Factor
Accuracy
Input impedance
Maximum input voltage
Input Coupling
Rise Time
CH 1 Output
Polarity Inversion
Horizontal Deflection
Display modes
Time base
Sweep Magnifications
Accuracy
Trigger System
Modes
Source
Coupling
Slope
Senstivity & Frequency Range
AUTO, NORM
INT (VERT)
EXT
TV-V, TV-H
External trigger input impdance Capactive of some 30 pF with approx. 1 MΩ in parallel
30 V (DC + peak AC)
DC to 30 MHz normal (x 1)
DC to 10 MHz magnified (x 5) - only CH 1
10 Hz to 30 MHz normal (x 1)
10 Hz to 10 MHz magnified (x 5) - only CH 1
CH1, CH2, ADD, DUAL (CHOP: Time/div switch):
0,2 s-1 ms, ALT: Time/div. switch: 0,5 ms-0.2 µs
5 mV/div to 20 V/div in 12 calibrated steps of a 1-2-5 sequence.
Continuously variable between steps at least 1:2.5
X5 MAG: 1 mV/div. to 4 V div. in 12 calibrated steps (CH 1 only)
Normal: ± 3 %, Magnified: ± 5 % (only CH 1)
approx. 1 MΩ in parallel with 30 pF
Direct: 400 V (DC + peak value AC)
Probe: refer to probe specification
DC-GND-AC
12 ns of less (35 ns or less: x 5 MAG)
Termination connection 25 mV/div to 50 Ω: 20 Hz to 10 MHz (-3 dB)
CH 2 only
x 1, x10, VARIABLE, X
0,2 µs, div to 0.2 s/div in 19 calibrated steps with 1-2-5 sequence
uncalibrated continuous control of over 2.5 times is possible
10 times (maximum sweep rate: 20 ns/div.
Note: 50 ns/div of A Time bases are ± 10 %
± 3 % (10 to 35°C), ± 5 % (0° C to 40° C), ± 2% increase when magnified
AUTO, NORM, TV-V, TV-H
VERT (DUAL, ALT), CH1, LINE, EXT
AC
+ or -
20 Hz - 2 MHz
0.5 div (2.0 div)
0.2 V
p-p
at least 1 div. or 1.0 V
pp
- 31 -
.
Y,
2 Hz - 20 MHz
1.5 div (3.0 div)
0.8 V
p-p
20 MHz –30 MHz
2,5 div (4.0 div)
1.0 V
p-p