Sample Weight Percentile; Unit Of Measure Conversion; Secondary Units Of Measure - PCE Instruments HLD150 Bedienungshandbuch

5) Press ZERO; the display will indicate "- - - - - -" and the indicator will calculate the Average Piece Weight (APW).
After a few instants the display will indicate the quantity selected put on the platform.
6) Add the rest of the items to count in the container and whose value will appear on the display.
7) Unload the scale, the APW will remain stored in memory for the next counting of similar pieces, without having to
repeat the REFERENCE operation.
8) By pressing the MODE key one switches from the display of the number of pieces to the display of the average
piece weight and of the net weight.
9) Per cancel or to carry out a new reference operation, press the PCS key and repeat the operations as
describe in point 1).

6.7 SAMPLE WEIGHT PERCENTILE

In this functioning mode, the display shows the weight expressed as a percentile, comparing it with a reference weight
for which the 100 percentile has been already linked.
MATCHING PROCEDURE
- Put the reference weight on the scale
- Press the % key when the "stable" indicator is on.
- The scale has executed the percentile matching and displays the percentile of the weight on the scale.
- Unload the scale: the following weighs will be expressed as a percentage in reference to the reference weight.
- To cancel or execute a new matching operation, press the % key and repeat the operations described above.

6.8 UNIT OF MEASURE CONVERSION

By pressing various times the MODE key the conversion into the secondary units of measure takes place; the relative
symbol will turn on in the display (see section 5).
The function is not available if the counting function or the percentile function is enabled.
It is possible to enable or disable the unit of measure in the "F1 Unt" step, see section 7.2.
With approved scale only the "g" and "ct" units are available.

6.8.1 SECONDARY UNITS OF MEASURE

Unit mark Unit name
g CAL gram
g gram *
ct CAL net carat
ct net carat *
lb lb
oz ounce
d dram
yn grain
ozt troy ounce
dwt penny
weight
mom momme
tl.h tael twn
tl.c tael chn
tl.t troy tael
t tola
bt Bangladeshi
tola
n newton
* Weight x 10, high resolution.
.
Division of the secondary units
HLD150 HLD300
0.02 0.05
0.002 0.005
0.1 0.2
0.01 0.02
0,000005 0,00001 0,00002
0,0001 0,0002
0,002 0,005
0.30865 0.77161 1,54324
0,0001 0,0002
0,002 0,005
0,001 0,002
0,0001 0,0002
0,0001 0,0002
0,0001 0,0002
0,0002 0,0005
0,0002 0,0005
0,00002 0,00005
HLD600 HLD1500 HLD3000
0.1 0.2
0.01 0.02
0.5 1
0.05 0.1
0,00005 0,0001
0,0005 0,001
0,01 0,02
3,08647 7,71618
0,0005 0,001
0,01 0,02
0,005 0,01
0,0005 0,001
0,0005 0,001
0,0005 0,001
0,001 0,002
0,001 0,002
0,0001 0,0002 0,0005
9
Conversion (g)
HLD6000
0.5 1
0.05 0.1
2 5
0.2 0.5
0,0002 =453.59237g
0,002 0,005 =28.349523125
0,05 0,1 =1.7718451g
15,43236 0.0647989g
0,002 0,005 =31.1034768g
0,05 0,1 =1.55517384g
0,02 0,05 =3.749996g
0,002 0,005 =37.49995g
0,002 0,005 =37.799375g
0,002 0,005 =37.4290018g
0,005 0,01 =11.6638039g
0,005 0,01 1bt=11.663803
0,001 =102.040816g
=0.2g
g
9g