Operating Elements And Connections - Monacor DMT-3060 Bedienungsanleitung

Please unfold page 3. Then you can always see the operating
GB
elements and connections described.
Contents
1 Operating Elements and Connections . . . . . . . . . . . . . . . 12
2 Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4 Setting into Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5 Carrying out Measurements . . . . . . . . . . . . . . . . . . . . . . 14
5.1
5.2
5.3
5.4
6 Replacing of Battery or Fuse . . . . . . . . . . . . . . . . . . . . . . 17
7 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

1 Operating Elements and Connections

1 LCD display
2 Button "MAX HOLD" for "freezing" the maximum measuring
value in case of fluctuation of the displayed value
3 Button "DATA HOLD" for "freezing" a measuring value
4 Rotary switch for measuring range adjustment
5 Jack "µA mA" for the red test lead (positive pole) for current
measurements below 200 mA
6 Jack "10 A" for the red test lead (positive pole) for current
measurements from 200 mA to 10 A max.
7 Jack "COM" for the black test lead (negative pole)
8 Jack "V Ω" for the red test lead (positive pole) for voltage and
resistance measurements as well as for diode tests
12
Voltage measurement . . . . . . . . . . . . . . . . . . . . . . . . . 14
Current measurement . . . . . . . . . . . . . . . . . . . . . . . . . 15
Resistance measurement and continuity test . . . . . . . 15
Diode test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16