Operating Elements; Safety Notes - Monacor Measurement DMT-2050 Bedienungsanleitung

Please unfold page 3. Thus you
GB
will always be able to see the
operating elements described.

1 Operating Elements

1 Display
2 Button HOLD for holding a meas-
3 Button RANGE for manual range
4 Function button for switching be-
5 On-off switch and selector switch
6 Button cells: 1.5 V, LR-44

2 Safety Notes

This unit corresponds to all required
directives of the EU and is therefore
marked with
WARNING
14
ured value
selection; automatic range selec-
tion: keep the button pressed until
the symbol
the display disappears
tween DC and AC voltage meas-
urement or resistance measure-
ment, continuity
diode test
for switching between voltage
measurement and other meas-
urements
on the top right of
.
With this meter, very
high voltages danger-
ous to life can be
measured. Particular
care must be taken
when measuring volt-
buzzer, and