Operating Elements And Connections - Monacor DMT-1050 Bedienungsanleitung

Please unfold page 3. Then you can always see the operating ele-
GB
ments and connections described.
Contents
1 Operating Elements and Connections . . . . . . . . . . . . . . . . . . . 12
2 Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4 Setting the Meter into Operation . . . . . . . . . . . . . . . . . . . . . . . . 14
5 Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.1 Voltage measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.2 DC current measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.3 Resistance measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.4 Continuity test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.5 Current amplification of transistors . . . . . . . . . . . . . . . . . . . . . . 16
5.6 Diode test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.7 Holding a measured value . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6 Replacing the Battery or Fuse . . . . . . . . . . . . . . . . . . . . . . . . . 17
7 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

1 Operating Elements and Connections

1 LCD display
2 Button "HOLD" for holding a measured value
3 Jack "COM" for connecting the black test lead (negative pole)
4 Jack "10ADC" for connecting the red test lead (positive pole) when
measuring DC currents between 200 mA and 10 A max.
5 Selector switch for adjusting the measuring range
6 Socket for measuring the current amplification of transistors
7 Jack "VΩmA" for connecting the red test lead (positive pole) when
measuring voltages, currents below 200 mA, resistances, and
diodes
12