Accessories - Sartorius Mikro-Dismembrator U Bedienungsanleitung

Accessories

Cat.-No. Description
Shaking flasks made of stainless steel 1.4301
853 1803 Shaking flask, stainless steel 1.4301, volume approx. 3 ml,
with PTFE gasket and cap
8531811 Shaking flask, stainless steel 1.4301, volume approx. 5 ml,
with PTFE gasket and cap
853 1820 Shaking flask, stainless steel 1.4301, volume approx. 7 ml,
with PTFE gasket and cap
Shaking flasks made of PTFE
853 1838 Shaking flask, PTFE, volume approx. 3 ml,
with cap
853 1846 Shaking flask, PTFE, volume approx. 5 ml,
with cap
853 1854 Shaking flask, PTFE, volume approx. 7 ml,
with cap
853 1862 Shaking flask, PTFE, volume approx. 20 ml, with cap
Holder 8531897 is required for using this shaking flask!
Shaking flasks made of PTFE
853 1943 Shaking flask, PTFE, volume approx. 3 ml,
with screw cap
853 1935 Shaking flask, PTFE, volume approx. 5 ml,
with screw cap
853 1927 Shaking flask, PTFE, volume approx. 7 ml,
with screw cap
853 1951 Shaking flask, PTFE, volume approx. 20 ml, with screw cap
Holder 8531897 is required for using this shaking flask!
Containers for disposable tubes, holder
853 1889 Container for 3 disposable test tubes 2.2 ml d 10.8 +37 mm,
for instance Sarstedt no. 72.608
Holder 8531897 is required for using this shaking flask!
853 1960 Container for 4 cryotubes
Holder 8531897 is required for using this shaking flask!
853 1897 Holder for shaking flask 20 ml (8531951) and for the containers
for disposable tubes (8531889 and 8531960)
Special accessories
853 1900 Tray for microwell plates, capacity of 2 microwell plates with 96 borings,
for using the Mikro-Dismembrator as a small shaker