BEHA Unitest TELARIS ISO Bedienungsanleitung Seite 29

Warranty
General
Display:........................................................... LCD
Current consumption: ....................................20mA (standby operation)
Auto power off:............................................... after approx. 5 minutes
Power supply:................................................. 6x1,5 V, LR6 Size AA
Battery life:......................................................for average usage approx. 1 year
Dimensions (LxWxH): ....................................235x105x68mm
Weight:............................................................approx. 650g
Environmental Conditions:
Temperature ranges:...................................... 0°C...40°C
Relative humidity:........................................... 80% for -10°C
Reference range:.............................................+17°C ...27°C, max. 70% rel. Humidity
Casing:............................................................Protective Class II
Overvoltage class:.......................................... CAT III / 600 V towards ground
Degree of pollution:........................................ 2
Type of protection:..................................... IP50
Height above MSL:......................................... up to 2000m
12 month Warranty
UNITEST instruments are subject to strict quality control. However, should the instrument function impro-
perly during daily use, your are protected by our 12 months warranty (valid only with invoice).
We will repair free of charge any defects in workmanship or material, provided the instrument is returned
unopened and untampered with, i.e. with undamaged warranty label.
Any damage due to dropping or incorrect handling are not covered by the warranty.
If the instrument shows failure following expiration of warranty, our service department can offer you a
quick and economical repair.
Subject to technical change without notice !
29