Technical Data - BEHA Unitest TELARIS ISO Bedienungsanleitung

Technical Data

13.0 Technical Data
Insulation Resistance Measurement
Range
0,005...1,999 MΩ
2...19,99 MΩ
20...199,9MΩ
0,200...1,999GΩ
Nominal Test voltage
100V DC
250V DC
500V DC
1000V DC
Test-Current:.................................................. ≥ 1mA at U N
Short circuit current Is:...................................≤ 2mA
automatic measurement range selection
Low Ohm Measurement
Measurement range:....................................... 0,03..19,99 Ω
Resolution:..................................................... 0,01 Ω
Tolerance:....................................................... ±(3% v.M. +3 Digit)
Open Circuit Voltage:...................................... 5V...9V DC
Test current:....................................................≥ 200mA for resistance < 2Ω
Number of measurements.............................. approx. 1400 (at 1Ω to Lowbat)
Overload protection:........................................600V AC/DC
Fuse:................................................................F500mA/250V
Compensation of Test Lead:
Test lead resistance:
AC/DC Voltage (40...500Hz)
Range Resolution
0...500V 1
28
Resolution Tolerance
1 kΩ
10 kΩ ±(5% rdg.. +5 Digit)
100 kΩ
1 MΩ
max. OpenVoltage Uq
UN + 50%
UN + 50%
UN + 50%
UN + 50%
max. 2,00 Ω
Tolerance
±(3% rdg. +3 D)
Overload Protection
1200V AC/DC
number of measurements at (to LowBat)
100kΩ - ca. 2500
250kΩ - ca. 2000
500kΩ - ca. 1400
1 MΩ - ca. 600
Overload Protection Internal Resistance
600V AC/DC 330kΩ