Turning The Camera On; Setting The Language, Date And Time - Concord Eye-Q series Kurzanleitung

1
1. Open the Battery/Memory Card door. (fig.1.1)
2. Insert the batteries and the SD memory card (sold separately). (fig.1.2-1.3)
3. Close the door.
2
Note: To extend battery life,
• The LCD will be off after 1 minute of inactivity. After the LCD is
• The camera will automatically power off after 2 minutes of inactivity. Press
3
1. Press
2. Press the OK button to select. The next screen shows date/time setup page. (fig. 1.2)
3. Press
selected segment will blink.
• When the Time Format field is reached, keep pressing
4. Press
5. Press the OK button to exit date/time setting. The next screen displays live viewfinder.
DZ5062 QSG(514174-00)-E 2
Downloaded from www.Manualslib.com
LOADING THE BATTERIES AND THE SD MEMORY CARD
fig.1.1

TURNING THE CAMERA ON

Press and hold the Power button (
automatically turned off, the Flash Ready LED blinks. Press any button to
reactivate the LCD.
and hold the Power ( ) button for about 1 second to turn the camera
back on.

SETTING THE LANGUAGE, DATE AND TIME

When the camera is powered on for the first time, the Language, Date and Time menus will appear.
fig. 1.1
or to highlight the language you would like to use. (fig. 1.1)
to highlight the Date field, the Time fields, the Date Format field or the Time Format field. The
or to change the number in the blinking position.
1
3
5
manuals search engine
fig.1.2
) for about 1 second to turn the camera on.
2
3
DATE/TIME SETUP
01 - 01 - 2004
01 : 01 AM
MM - DD - YYYY
12 - HOUR
RETURN
fig. 1.2
, the cursor will return to the date field.
2
A A
AWB AWB
⁄ ⁄ ⁄ ⁄
fig.1.3
2
3
A
AWB
⁄ ⁄
OK
SET
A
5/31/04, 4:13:39 PM
AWB