Operation - Beko VCC 5325 AR Bedienungsanleitung

3 Usage
3.1 Intended use
The appliance has been designed for household
use and is not suitable for industrial use.
3.2 Attaching/removing the
hose
1. To attach the hose (17), push the hose cap (7) in
the arrow direction in order to match it with the
suction nozzle and rotate it clockwise.
2. To remove the hose (17), rotate the hose cap (7)
counter-clockwise and pull it.
3.3 Attaching/removing the
telescopic tube
1. Attach the telescopic tube (3) to the handle (1).
2. Pull the telescopic tube (3) from the handle (1)
to remove it.
3. Push the telescopic adjustment latch (4) in the
arrow direction and pull the telescopic tube (3)
to adjust its length.
3.4 Attaching/removing the
parquet/carpet brush
You can install/remove the narrow end of the
telescopic tube (3) from/to the parquet/carpet
brush (9).
Vacuum Cleaner / User Manual
3.5 Adjusting the parquet/
carpet brush
Perform the following actions on the adjustment
latch (4) located on the parquet/carpet brush (9);
• Use " " position for hard floors and parquet.
• Use " " position for rugs and carpets.

3.6 Operation

1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
2. Press the on/off button (13) to switch on your
appliance.
3.6.1 Adjusting the suction
power
1. You can adjust the suction power using the
suction power adjustment button (14) found
on the appliance. Rotating in the clockwise
direction will increase the suction power and
in counterclockwise direction will decrease the
suction power.
2. You can lower the suction power of the parquet
carpet brush by pulling backward the vacuum
adjustment control (2) located on the handle
(1) without the need to use the suction power
adjustment knob (14) found on the appliance.
7 / EN