Rothenberger ROWELD Quick-S-Electronic Bedienungsanleitung Seite 8

Electrical safety
Before commissioning, please check whether the
operating voltage for the device and the line
voltage match.
If the device is brought into warm surroundings
from cold surroundings, condensation may form
on it. In that case, wait until temperature
adjustment has occurred. There is a risk of mortal
danger if the device is commissioned when it is
covered in condensation!
The connection plug on the device must fit into the
socket. The plug must not be changed in any way.
Do not use any adapter plugs together with any
protective grounded devices. Unmodified plugs
and suitable outlets reduce the risk of an electric
shock!
Avoid body contact with grounded surfaces such
as those on pipes, radiators, stoves and
refrigerators. There is an increased of risk due to
electric shock if your body is grounded.
Keep the device away from rain or moisture. The
penetration of water into an electrical device
increases the risk of an electric shock.
Do not use the cable for other purposes such as
carrying or hanging up the device, or to pull the
plug out of the electrical outlet. Keep the cable
away from heat, oil, sharp edges or moving
devices. Damaged or tangled up cables increase
the risk of an electric shock.
If you work outdoor with an electrical tool, always
use special extension cables that are approved for
external areas. Using suitable extensions cables for
outdoor areas reduces the risk of an electrical
shock.
Personal safety
This device is not intended to be used by persons
(including children) with limited physical, sensory or
mental capabilities or persons who have
insufficient knowledge and/or experience, unless
they are being supervised by a person responsible
for their safety or have received instructions on
how to use the device from that person. Electrical
tools are dangerous if they are used by
inexperienced persons.
Always store electrical tools out of the reach of
children when not in use.
Please be cautious and pay attention to what you
are doing and use common sense when working
with an electrical tool. Do not use the device if you
are tired or under the influence of drugs, alcohol or
medications. Not paying attention for just a
moment can result in serious injuries when using
such a device.
Avoid unintended commissioning. Always make
sure that the switch is in the "OFF" position before
you insert the plug in the socket. If you have the
finger on the switch when you are carrying it or
have it switched on when you connect it to the
power supply, this can result in accidents.
Do not overestimate yourself! Ensure you are
standing securely and always maintain your
equilibrium (balance). That way, you are in a better
position to control the device in the event of an
unexpected situation.
Wear suitable clothing! Do not wear any overly
large clothing or jewellery. Keep hair, clothing and
gloves away from any moving parts. Loose
clothing, jewellery or long hair can be caught in
moving parts.
Careful Handling and Use of Electrical
Tools
Do not overload the device. Use the correct
electrical tool that is intended for the task at hand.
You can work better and more securely in the
indicated performance range with the correct
electrical tool.
Never use an electrical tool that has a faulty switch.
An electrical tool that cannot be switched on or off
any more is dangerous and must be repaired.
Pull the plug out of the socket before you adjust
the device settings, change accessories or put the
device away. These precautions prevent the device
from starting unintentionally.
Treat the device with care. Examine it to see
whether the moving device parts function perfectly
and do not stick or to see whether any parts are
broken or damaged to such an extent that the
functionality of the device is impaired. Have
damaged parts repaired before using the device.
Many accidents are caused by poorly maintained
electrical tools.
Utilise electrical tools, accessories, add-on tools, etc
in accordance with these instructions and in the
manner that is prescribed for this special device
type. Take the working conditions and the activity
that is to be performed into consideration while
doing this. The use of electrical tools for other
applications than those that are intended can result
in dangerous situations.
Prior to cleaning: Switch off mains! Use a mild
cleaning agent and a damp cloth for cleaning
Never clean devices so they are dripping wet!
ENGLISH
7