Introduction - SMA MLX 60 UL Installationsanleitung

Introduction

1 Introduction
The MLX inverters are designed to act exclusively as grid-
tied inverters for photovoltaic (PV) systems. The inverter
converts DC voltage generated by a solar array into
electrical AC power. The unit must be tied to the utility
grid and a photovoltaic system in order to operate
properly. It is not suitable for any other applications (such
as a battery back-up or wind-powered systems).
The MLX system consists of 4 main components (see also
Illustration 1.1):
•
MLX inverter.
•
DC combiner.
The DC combiner makes it possible to combine
the needed number of PV strings for the MLX
inverter. A DC combiner is needed for each MLX
inverter.
•
MLX Inverter Manager.
The MLX Inverter Manager is required for
operating the MLX inverters. Each Inverter
Manager can handle up to 42 inverters. The
Inverter Manager handles all communication to
the inverters. It forms a single point of interface
for data accusation systems, upload to cloud
services and power-plant control.
•
LCS Tool.
The LCS Tool is required for commissioning and
servicing MLX inverters, via the Inverter Manager.
The LCS Tool acts as the primary user interface
for the MLX system.
L00410644-01_2q / Rev. date: 2014-06-02
1 1
7