Kröber O2 Gebrauchsanweisung Seite 76

Kröber O2
Taking into service
Nasal cannula
Fig. 21: Connection to the nasal cannula
WARNING! Danger of tripping over!
On the back of the Kröber O2 you will find a winding device for the mains lead.
This should be used when the unit is out of use, to avoid any danger of tripping
over.
76
1 Plug the FireSafe Nozzle in oxygen
Oxygen hose
2
short oxygen tubing (0.33 m).
flow direction into the nasal cannula.
ATTENTION!
Observe flow direction indicated
by the arrow!
ATTENTION!
For the best protection of the
patient, place the FireSafe Nozzle
in the oxygen tubing routing as
close to the patient as possible!
Connect the other terminal to the