Without External Humidification - Kröber O2 Gebrauchsanweisung

7.3.1 Without external humidification

If the unit is to stand next to the user, it is started up as follows:
Fig. 8: Mains lead
Fig. 9: Angular connection
1
Fig. 10: Humidifier Max.-mark
1 Insert the mains lead into a
professionally grounded socket.
ATTENTION!
The Kröber O2 is only
designed for operation on a 230
Volt, 50Hz mains network.
2 The metal oxygen outlet is installed
using a wrench (metric size 17).
3 Fill the humidifier up to the top
MAX.-mark (1).
Kröber O2
Taking into service
71