Safety; General; Customer's Responsibility - Kröber O2 Gebrauchsanweisung

Kröber O2

Safety

3 Safety
This section provides an overview over all important safety aspects for safe and trouble-free
operation of the unit.
The individual chapter additionally contain actual safety notes highlighted with symbols,
which will help to avoid immediate dangers.

3.1 General

The machine is built according to the currently applicable rules of technology and is safe to
operate.
However, dangers may still arise from the unit if it is incorrectly operated or used for
purposes it is not intended for.
Any persons using this unit must have read and understood these instructions before starting
operation. This also applies if the person in question has already worked with just such a unit
or similar equipment or was trained by the manufacturer.
Knowing the content of these instructions for use is a prerequisite for the avoidance of
mistakes and for safe and trouble-free operation of the unit.
Neither changes nor conversions may be carried out on the equipment, which have not been
explicitly authorized by the manufacturer, to avoid dangers and to ensure optimal
performance.
All safety decals and operating signs on the unit must be kept well legible at all times.
Damaged or illegible decals must be replaced immediately.

3.2 Customer's responsibility

These instructions for use must be kept near the unit, so that it is available for the user at any
time.
Apart from the notes on safety mentioned in this manual, all generally valid safety and
accident prevention instructions must also be observed and adhered to.
The machine may only be operated in a technically perfect condition and if operationally
safe.
The information contained in the instruction manual is complete and must be adhered to
without limitation.
58