With External Humidification - Kröber O2 Gebrauchsanweisung

Kröber O2
Taking into service

7.3.2 With external humidification

If the unit does not need to stand next to the user, the installation is carried out as follows:
Fig. 14. Mains lead
Fig. 15. Adapter for ext. humidification
Fig. 16. Oxygen outlet connector
74
1 Insert the mains lead into a
professionally grounded socket.
ATTENTION!
The Kröber O2 is only designed
for operation on a 230 Volt, 50Hz
mains network.
2 Screw the angle connection to the
oxygen outlet of the Kröber O2 with a
wrench (metric size 17).
3 Connect the oxygen outlet
connector.