Operation - Mettler Toledo M400 Kurzanleitung

1

Operation

h
h
4
Entry of data values, selection of data entry options
Use the m key to increase or the . key to decrease a digit. Use the same keys to
navigate within a selection of values or options of a data entry field.
Note: Some screens require configuring multiple values via the same data field (ex:
configuring multiple setpoints). Be sure to use the c or b key to return to the pri-
mary field and the m or . key to toggle between all configuration options before
entering to the next display screen.
Navigation with u in Display
If a u is displayed on the bottom right hand corner of the display, you can use the
c or b key to navigate to it. If you click [ENTER] you will navigate backwards
through the menu (go back one screen). This can be a very useful option to move
back up the menu tree without having to exit into the measuring mode and re-enter
the menu.
Exit menu
Note: Exit the menu at any time by pressing the b and c key simultaneously
(ESCAPE). The transmitter returns to the Measurement mode.
"Save changes" dialog
Three options are possible for the "Save changes" dialog:
– "Yes & Exit": Save changes and exit to measuring mode.
– "Yes & u": Save changes and go back one screen.
– "No & Exit": Don't save changes and exit to measuring mode.
The "Yes & u" option is very useful if you want to continue configuring without hav-
ing to re-enter the menu.