Information On The Internet - bürkert eCONTROL 8611 Schnellstart

Guarantee
This document contains no guarantees. Please refer to our general
terms of sales and delivery. The guarantee is only valid if the
eCONTROL 8611 is used as intended in accordance with the specified
application conditions.
The guarantee extends only to defects in the
eCONTROL 8611 and its components.
We accept no liability for any kind of collateral damage which
could occur due to failure or malfunction of the device.
4.3. approvals
The approval rating on the Bürkert type plates refers to Bürkert
products.
4.4 information on the internet
The operating instructions and data sheets for Type 8611 can be found
on the Internet at:
www.burkert.com Documentation
Type 8611
The complete operating instructions can be ordered on a CD by
quoting the following identification number: 00805612
6
manuals / data sheets
English
Type 8611
Description of the Device
descripTion of The device
functions
The universal controller is linked to a control circuit. The position
set-point value of the valve is calculated from the process set-point
value and the process actual value via the control parameters
(PI controller). Electropneumatic valves (only in conjunction with a
control system), magnet control valves or electromotive valves can
be used as control valves.
Technical daTa
operating conditions
Ambient temperature:
(operation and storage)
Relative humidity:
Protection class:
Standard conformity CE:
-20 ... +70 °C
≤ 80 %, not condensed
IP65 to EN 60529
according to EMC Directive
EN50081.1
EN50082.2