Ordering Spare Parts; Warranty; Covered; Not Covered - Barbecook OSKAR series Bedienungsanleitung

Damages caused by not following these instructions are
regarded as inadequate maintenance and are not covered by
the warranty.
Below the exploded view of your appliance (second part of the
manual), you find a list with all parts of which the appliance is
composed. This list includes a symbol that specifies the material
of each part, so you can use it to check how you have to maintain a
particular part. The parts list uses the following symbols:
Symbol

8.7 Ordering spare parts

Parts that are directly exposed to fire or intense heat have to be
replaced from time to time. To order a spare part:
1. Look up the reference number of the part you need. You find
a list of all reference numbers below the exploded views in the
second part of this manual and on www.barbecook.com.
If you registered your appliance online, you will automatically
be guided to the correct list.
2. Order the spare part at your point of sale. You can order parts
both under and outside warranty.
MAN_OSKAR_S_M_L_BBC_171109_A.indb 9
Material
Enamel
Chrome
Stainless steel
Powder coated
9

WARRANTY

9.1 Covered

Your appliance comes with a warranty of two years, starting from the
date of purchase. This warranty covers all manufacturing defects,
provided that:
• You used, assembled and maintained your appliance according
to the instructions in this manual. Damages caused by misuse,
incorrect assembly or inadequate maintenance are not regarded
as manufacturing defects.
• You can present the receipt and the unique serial number of your
appliance. This serial number starts with a C, followed by 15
digits. You can find it:
• On this manual.
• On the packaging of the appliance.
• On the inside of the foot of the appliance.
• The Barbecook quality department confirms that the parts are
defective and that they proved defective under normal use,
correct assembly and adequate maintenance.
If one of the above conditions is not met, you cannot claim any form
of contribution. In all cases, the warranty is limited to the repair or
replacement of the defective part(s).

9.2 Not covered

The following damages and defects are not covered by the warranty:
• Normal wear and tear (rusting, distortion, discolouration...) of parts
that are directly exposed to fire or intense heat. It is normal to
replace these parts from time to time.
• Visual irregularities that are inherent to the manufacturing process.
These irregularities are not regarded as manufacturing defects.
• All damages caused by inadequate maintenance, incorrect
storage, improper assembly or modifications made to pre-
assembled parts.
• All consequential damages caused by careless or non-compliant
use of the appliance.
• Rust or discolouration caused by external influences, the use of
aggressive detergents, exposure to chlorine... These damages are
not regarded as manufacturing defects.
www.barbecook.com
9
09/11/17 12:18