Operation
ADVICE:
In the standard configuration of the KVM extender, the computer's
video signal is output at the active as well as the concurrent console monitor.
If necessary, change the video modes of the user modules (see page 34) to switch
off the image of the concurrent console while you operate the extender at the
other console.
Right for exclusive access to the console on page 33
Changing the video mode of consoles on page 34
Changing the exclusive key on page 31
Switching power outlets
A compatible power switch (
the power supply of devices by using the KVM extender.
IMPORTANT:
The configuration of power switches and the assignment of power
outlets is carried out in the web application
How to switch the power outlets assigned to the KVM extender:
1. Use the hotkey
2. Use the
arrow keys
NOTE:
If the computer module is not assigned with at least one power outlet,
this entry cannot be selected and the text
3. Press
Enter
to carry out one of the following options:
turn off
turn power outlet(s) off
turn power outlet(s) on
turn on
19 · G&D DP1.2-Vision-CAT
ePowerSwitch 1G R2
(default) to open the on-screen display.
Ctrl+Num
to select the row
,
4M+ R2
and
Config Panel
.
Target Power
.
n.c.
(not connected) is shown instead.
8M+ R2
) lets you switch