Changing The Exclusive Key - G&D DP1.2-Vision-CAT Installation Und Bedienung

Configuration

Changing the exclusive key

After pressing the hotkey for the exclusive operation of the extender the input
devices of the concurrent console are disabled. Only after pressing the hotkey again
at the active console the KVM extender can again be operated by both consoles.
The hotkey for the exclusive operation consists of at least one hotkey modifier (see
Changing hotkeys on page 28) and an exclusive key. Both keys can be selected from a
number of available keys. You can change both the hotkey modifier
exclusive key
Print
How to change the exclusive key:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under Exclusive key
Backspace
PrtSc
Scroll
Num
Pause
Insert
Delete
Home
End
PgUp
PgDn
Space
5. Press to save your settings.
F2
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click on
.
guration
1. Click on the tab
2. In the Exclusive mode action key
You can choose between the keys Backspace, Print, Scroll, Num, Pause, Copy,
Delete, Home, End, PgUp, PgDn and Space.
3. Click on Save
31 · G&D DP1.2-Vision-CAT
.
(default) to open the on-screen display.
System setup and press
Hotkey and press
press F8 to select on of the following options:
 Backspace key
 Print key (default)
 Scroll key
 Num key
 Pause key
 Insert key
 Delete key
 Home key
 End key
 Page Up key
 Page Down key
 Space key
KVM extender
General and then on the tab
.
Enter .
Enter .
.
CPU
field, you can select a key:
Ctrl
.
and the
Confi-