Right For Exclusive Access To The Console - G&D DP1.2-Vision-CAT Installation Und Bedienung

Configuration

Right for exclusive access to the console

If no inputs are made at the active console during the adjusted time span of the auto-
matic input lock (default: 1 second), the default settings of the KVM extender permit
the other console to operate the extender.
If the function right for exclusive console access is activated in the web application,
you are able to operate the KVM extender exclusively by pressing the hotkey
(default:
key+Print
Pressing this key combination deactivates the input devices of the concurrent con-
sole. By pressing the key combination again at the active console, both consoles can
operate the KVM extender again.
NOTE:
After the exclusive operation of the KVM extender has been activated at a
console, the Caps Lock, Num and Scroll Lock LEDs are blinking alternately at the
keyboard of the locked console.
The blinking Scroll Lock LED at the active console indicates that the exclusive
operation of the KVM extender is activated.
How to select the right to exclusively operate a console:
1. Press
Ctrl+Num
2. Select the row
the remote console (at the
Select the row
right for the local console (at the
3. Under
Enable exclusive
 right for exclusive access is granted (default)
yes
 right for exclusive access is denied
no
4. Press to save your settings.
F2
33 · G&D DP1.2-Vision-CAT
).
Ctrl+Print
(default) to open the on-screen display.
and press
Console setup
CON
Local console setup
press
F8
if you want to adjust the right for
Enter
module).
and press if you want to adjust the
Enter
module).
CPU
to select on of the following options:
Hot-