Information display
Information displays are shown temporarily (5 seconds) in the upper left corner.
ADVICE:
If the temporary information display is active, you can press the hotkey
Ctrl+Caps Lock
to repeat the caption.
The information display can also be shown permanently or it can be disabled
How to change the setting of the information display:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under
Display
Off
information display is turned off
information display is shown temporarily for 5 seconds (default)
Temporary
Permanent
permanent information display
5. Press
to save your settings.
F2
1. In the menu, click on
2. Click on the user account you want to configure and then click
on
Configuration
3. Click on the tab
4. In the
Show OSD info
information display is turned off
Off
Temp
information display is shown temporarily for 5 seconds (default)
permanent information display
Perm
5. Click on
Save
(default) to open the on-screen display.
and press
Console setup
and press
Personal Profile
press
F8
to select between the following options:
Users
.
.
KVM extender systems
field, select between the following options:
.
.
Enter
.
Enter
.
G&D DL-DVI-Vision-CAT · 44
Configuration