G&D DL-DVI-Vision-CAT Installation Und Bedienung Seite 101

How to configure the Freeze mode:
1. Press Ctrl+Num
2. Select the row
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
3. Under
Freeze mode
 Freeze mode is disabled (default)
off
 Freeze mode is enabled
on
4. If the Freeze mode is active, press
under Freeze visualization
 shows a coloured frame when disconnected
frame
OSD  shows Frozen and the time passed since disconnection
 shows a coloured frame (
frame+OSD
5. Press F2 to save your settings.
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click on
guration .
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. In the
Freeze mode
Off
On | OSD timer + frame
Frame
OSD
6. Click on Save
(default) to open the on-screen display.
Console setup and press
press to select on of the following options:
F8
F8
:
.
KVM extender
.
Video channels
Configuration .
field, select one of the following options:
 Show no image if the connection is lost (default).
 Display of a coloured frame in case of a
disconnection as well as display of the warning
Frozen and the time elapsed since the
disconnection.
 A disconnection is indicated by a coloured frame.
 Display of the warning Frozen and the time elapsed
since the disconnection.
.
Enter .
to select one of the options available
) and Frozen (
frame
G&D DL-DVI-Vision-CAT · 34
Configuration
)
OSD
Confi-