Zulassung Für Usa - Siemens MD3 Betriebsanleitung

Überblick
1.7.2 Zulassung für USA
EXHIBIT J (FCC PART 68 REQUIREMENTS)
This equipment complies with Part 68 of the FCC Rules. On the soldering side
of this equipment is a label that contains, among other information, the FCC
Registration Number and Ringer Equivalence Number (REN) for this equipment.
You must, upon request, provide this information to your telephone company.
This equipment uses RJ12 plugs.
An FCC compliant telephone cord and modular plug are provided with this
equipment. This equipment is designed to be connected to the telephone network
or premises wiring using a compatible modular jack which is part 68 compliant. See
installation instructions for details.
The REN is useful to determine the quantity of devices you may connect to your
telephone line and still have all those devices ring when your telephone number is
called. In most, but not all areas, the sum at the REN's of all devices connected to
one line should not exceed five (5.0). To be certain of the number of devices you
may connect to your line, as determined by the REN, you should contact your local
telephone company to determine the maximum REN for your calling area.
If your telephone equipment causes harm to the telephone network, the Telephone
Company may discontinue your service temporarily. If possible, they will notify you
in advance. But if advance notice is not practical, you will be notified as soon as
possible. You will be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations
or procedures that could affect the proper functioning of your equipment. If they do,
you will be notified in advance to give you an opportunity to maintain uninterrupted
telephone service.
If you experience trouble with this telephone equipment, please contact
SIEMENS Energy & Automation, Inc.
Factory Service Center
3000 Bill Garland Road
Johnson City, Tennessee 37605
Tel: (423) 461-3000
for information on obtaining service or repairs. The telephone company may ask
that you disconnect this equipment from the network until the problem has been
corrected or until you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs.
6NH7811-0AA31
1-8
© Siemens AG 2002 All Rights Reserved
Modem MD3 (07/2002)