Becker Centronic TimeControl TC52 Bedienungsanleitung Seite 60

Operating Instructions
SETTING
GB ENGL/ ASTRO SHIFT ▲▼
(Language, astro shift)
Note
The TEST MODE menu level will only be displayed if a light sensor is
connected to the device.
1. You have confi rmed the PROG2 END LIMIT menu level. TEST MODE ON/
OFF will appear.
You can activate or deactivate the TEST MODE (ON/OFF) using the +/- but-
2.
ton. Confi rm by pressing OK. GB ENGL will appear.
Note
To exit from TEST MODE, press the OK button in operating mode.
You can set the language required using the +/- button.
3.
4. Confi rm the language selected by pressing OK.
5. ASTRO SHIFT ▲ will appear.
You can set the required astro shift ▲ (max. +/- 120 mins.) using the +/-
6.
button.
Confi rm by pressing OK.
7.
8. ASTRO SHIFT ▼ will appear.
You can set the required astro shift ▼ (max. +/- 120 mins.) using the +/-
9.
button.
10. Confi rm by pressing OK.
11. The function ASTRO SHIFT ▼ has now been set.
12. Please read on for further programming options using the SETTING
menu.
60