Sony ExwaveHAD DXC-990 Bedienungsanleitung Seite 19

LEVEL
Adjusts the level within the range from –127
to +127. Adjust while watching the screen so
that the color is eliminated.
+: Green at the top and magenta at the
bottom will be eliminated.
–: Magenta at the top and green at the
bottom will be eliminated.
TRIGGER
Sets when you use a slave unit connected to
the TRIG IN connector and synchronize the
camera with a stroboscope.
OFF
Select when you do not connect a slave unit.
ON
Select when you connect a slave unit.
POLARITY
Sets to the same polarity as the input pulse
signal.
: Falling edge
: Rising edge
NEGA
Reverses the output image to negative/
positive.
OFF
Outputs the image normally.
ON
Outputs the image reversed to negative/
positive.
FLICKER CANCELLER
When using the camera in a 50 Hz lighting
area (DXC-990) or in a 60 Hz lighting area
(DXC-990P), you can obtain images with
less flicker under fluorescent light even
when SHUTTER is set to CCD IRIS or OFF.
Set this item to OFF when you want to set
NEGA to ON.
OFF
Disables the FLICKER CANCELLER
function.
ON
Reduces flicker under fluorescent light.
GENERAL Menu
19 GB