Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Specifications - Gm-Racing Street Xxs Bedienungsanleitung

4wd rtr 2.4 ghz
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

TROUBLESHOOTING

Problem
Motor does not run
Motor rotates reverse
No motor performance
The vehicle is diffi cult to
steer
Vehicle without function
Vehicle is very loud

SPECIFICATIONS

Length:
Width:
Height:
Wheelbase:
Ground clearance:
Motor:
Radio system:
LIABILITY FOR PRINTING ERRORS EXCLUDED! WE RESERVE THE RIGHT TO INTRODUCE MODIFICATIONS!
15
Possible errors
Broken motor wiring
Battery empty
Remote control does not work correctly, incor-
rectly adjusted throttle
Motor not working
Throttle trim not properly adjusted
Servoreverse switch throttle in wrong position
Battery almost empty
Throttle trim not properly adjusted
Drivetrain runs heavily
Drivetrain works loud
Motors gets very hot
Transmitter batteries empty
Steering trim not properly adjusted
Interferences
Throttle trim not properly adjusted
Transmitter LED's not illuminated
Transmitter and receiver crystal with different
frequencies (channels)
Transmitter - receiver not bound correctly
Throttle trim not properly adjusted
Receiver antenna without contact
Battery contacts dirty or bent
Transmitter LED's not illuminated
Gear mesh between pinion and gear not ad-
justed correctly
Gears or bushings worn out
Bushings runs heavily
235 mm
100 mm
60 mm
152 mm
5 mm
RC 131
GM-Racing XS-4i 2.4 GHz
To do
Resolder wiring
Change or charge battery
Check remote control, adjust throttle trim
Change motor
Set throttle trim to neutral
Servoreverse switch in correct position (left)
Change or charge battery
Set throttle trim to neutral
Check, clean drivetrain
Check gear mesh
Let motor cool down; check drivetrain, gear mesh,
check for binding parts
Change or charge battery
Trim steering servo with the adjustment knob on the left
side of the steering wheel
Make a short break an then try again
Set throttle trim to neutral
Check if transmitter is powered on
Check transmitter - receiver channel, if so change
Re-bind transmitter and receiver (see the relevant
chapter in this manual)
Set throttle trim to neutral
Check receiver antenna
Clean the contacts, re-adjust with a screwdriver
Change or charge battery
Check and re-adjust gear mesh
Check, change if necessary
Check, lube if necessary
GM-Racing Street XXS 4WD RTR
Inhaltsverzeichnis
loading

Inhaltsverzeichnis