GM-Racing STREET XXS Bedienungsanleitung Seite 13

Servoreverse throttle
Servoreverse steering
Bind-Button
ON/OFF-Switch
Power Indicator
A. Full Power (red and green)
B. Stop running (green flashing)
flashing
The adjuster for throttle trim, the servo reverse switches for the steering and throttle need not be adjusted. But should
have been adjusted somewhat by accident, here are the correct settings:
• Throttle: neutral (horizontal mark on adjusting knob)
• Servo Reverse Steering: Switch in right position
• Servo Reverse Gas:
LET THE FUN BEGIN
ON/OFF-
Switch
GM-Racing Street XXS 4WD RTR
Switch in left position
Steering trim
EPA steering
Throttle trim
Steering wheel
Throttle trigger
Battery case
NOTE:
Wait for about 5 seconds before moving the throttle
trigger, so that the transmitter initializes correctly.
Turn
ON
12