Introduction; Explanation Of Symbols; Intended Use - VOLTCRAFT K101 Bedienungsanleitung

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating
instructions for reference!
If there are any technical questions, please contact: www.conrad.com/contact

2. Explanation of symbols

The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric
shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in these
operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.

3. Intended use

The product is intended to be used in the following manner:
• Measuring temperatures by optional K-type temperature sensors in a temperature range from -200 °C to
+1370 °C or -328 °F to +2498 °F.
• Max. voltage at the inputs is 60V/DC or 24V/AC.
• Use only a 9V block battery for voltage supply.
• Use only in dry areas.
Contact with moisture, e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes
other than those described above, the product may be damaged. In addition, improper use can result in short circuits,
fires, electric shocks or other hazards. Read the
uct available to third parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
12
instructions carefully and store them in a safe place. Make this prod-