GUTMANN Planea Montageanleitung Seite 30

en
7. MONTAGEANLEITUNG
General information: Before leaving our factory, the extractor hood is subjected to
an extensive functional test. For a better technical understanding of the functional
components in their entirety, the extractor hood is supplied pre-assembled. The
latter shall be partly disassembled during installation, in accordance with the follow-
ing description.
1. Determine the positions of the following mounting holes with the help of the
specified dimensions. Missing dimensions depend on the model and must be
measured on the hood. Pay attention to the minimum distance between the hob
and the lower edge of the extractor hood. Ensure the correct operating side!
- 4 holes (Ø10 mm) for fastening the extractor hood (top)
Please ensure that the extractor hood is centrally arranged with respect to the
hobs.
2. Drill the holes and insert appropriate dowels flush.
30
Safety bolt