System Settings; How To Set Time And Date; Changing The Day; Changing The Time - Siemens IC60 Bedienungsanleitung

System Settings

4 System Settings
4.1

How to set time and date

4.1.1

Changing the day:

4.1.2

Changing the time:

4.1.3

Changing the date:

4.2

LCD backlight adjustment

16
Building Technologies
Fire Safety & Security Products
The alarm system has an internal clock that may be used to automatically arm or
disarm the alarm or turn outputs on or off. It is also used to identify when events
have occurred in the memory via the LCD keypad.
Should you need to change the time & date, this must be done from the CLIENT mode.
Always enter the CLIENT mode first:
1. Press: <PROG>
2. Enter: Master/User Pin Code (default 147258)
3. Press <ENTER>
DISPLAY: Client: User
1. Press <26>
2. <ENTER>
3. <2> <ENTER>
4. <1-7> <ENTER>
1-7 = current day (1 = Sun, 2 = Mon to 7 = Sat)
1. Press <26>
2. <ENTER>
3. <1> <ENTER>
4. <HHMM> <ENTER>
HH = Hour in 24-hour format and MM = minutes
1. Press <26>
2. <ENTER>
3. <3> <ENTER>
4. <DDMMYY> <ENTER>
DD =1-31 current date, MM = months 1-12, YY = year 00-99
Increasing the LCD backlight:
By holding down the <CTRL> button and repeatedly pressing the <LEFT> arrow
button the LCD backlight level can be increased to the maximum.Reducing the
LCD backlight:
By holding down the <CTRL> button and repeatedly pressing the <RIGHT> ar-
row button the LCD backlight level can be decreased to the minimum.
08.2007