Messages And Events; 3.15.1 How To Read System Messages; 3.15.2 How To Read Trouble Messages - Siemens IC60 Bedienungsanleitung

Using the system
3.15

Messages and events

3.15.1 How to read system messages

3.15.2 How to read trouble messages

14
Building Technologies
Fire Safety & Security Products
Any system failure that may occur is indicated by system messages. System mes-
sages are automatically displayed and are listed in the tables below. Read the
messages and call for service if necessary.
Message
Battery Low
Main Failure
Telephone Line Failure
Radio Device Battery Low
Supervise Detector Failure
Zone Inactivity Time-out
Dialer Kiss-off Failure
System messages
Tab. 3
Any failure or abnormal event that may occur is indicated by a trouble message
and the trouble indicator lights up.
Used key:
<MEM>
Reading messages
1. Press <MEM> to read out messages and other events stored in memory.
Message
Zone Tamper
System Tamper
Pendant Panic
Panic
Fire
Medical
Duress code used
Trouble messages
Tab. 4
Description – Action
The backup battery status is low (charger or bat-
tery failure)
The main power is disconnected or caused by
power outage.
The telephone line is disconnected or disrupted
Replace battery of the device in account
Radio detector failed to communicate
No movement detected during the expected time
in that zone
Communication failed. The phone line is available,
but the panel has not been able to establish a
connection.
Description - Action
Tamper of a particular zone
Main cabinet open or dismounted from the wall
Panic alarm initiated via radio pendant (remote control)
Panic alarm initiated via keyboard
Fire alarm initiated via keyboard
Medical alarm initiated via keyboard
Duress digit pressed by one of the users under threat
08.2007