Mounting Instructions Reel Packet; Scope Of Application - Dibo ECN-S Bedienungsanleitung

4.5. Mounting instructions reel packet

At use van of the reel packet (option) you need to mount the reel grip and connect the high pressure hose.
Mount the reel grip through the bolt and corresponding round head nut. Connect the high pressure hose by
means of tightening the hose coupling right to the high pressure coupling. See photo's below for clarification.
At use of reel(s) (optionally): always unroll the reel hose(s) completely during spraying activities to ensure an opti-
mal performance!

4.6. Scope of application

Efficient high pressure cleaning is achieved by following a few guidelines combined with your own experiences.
Each cleaning job is different and specific, therefore contact DiBO for the best solution in your application sector.
Using cleaning products (if applicable): the surface to clean should be sprayed so the product can act during
some time (do not let it dry!) before cleaning with high pressure jet.
Cleaning agents can increase the cleaning effect if they are used correctly!
Always follow/consider the safety instructions of the used product!
Cold water (high pressure) cleaning: removal of (mild) impurities/pollution and rinsing.
Hot water (high pressure) cleaning (if applicable): the cleaning effect will be such improved through increasing the
temperature (set the temperature experimentally according to the application).
Cleaning via lance with rotating head (if applicable): cleaning method to remove tough layers of dirt.
Cleaning using a steam lance (if applicable): this steam function (by overheating water) is used in 'sensitive' clean-
ing applications (eg: damage sensitive surfaces) where there is stubborn dirt (eg: degreaser) is removed by using
steam.
Please note: this application has high cleaning temperatures and requires various safety measures!
ECN-S REV 0 DiBO n.v. 43