Maintenance - Beyerdynamic Headzone PRO Schnellstartanleitung

3. How to connect the Headzone
• Connect the headphones to the headphone connection
• Connect the head tracker receiver rail to the base station
• Connect the RCA jacks
• Connect the base station via the Firewire connection
• Connect the supplied power pack
Attention:
Do not connect any power pack other than that supplied by beyerdynamic as the base
station may be damaged.
4. Commissioning
• Install the Headzone ®
• As soon as the software is installed and the base station is connected, switch on the base station via
the power switch . In the case of Windows
9
• Select the appropriate driver:
Windows: "WDM" Headzone
MAC: "Core Audio" Headzone
• Attention:
To avoid ear damage the volume should initially be set to minimum on connection and
putting on the headphones.

5. Maintenance

In the unlikely event of equipment failure, the product should be returned to your beyerdynamic
dealer. Unauthorised attempts at repair may invalidate the warranty.
base station
®
e.g. to a DVD player, mixer console or PC sound card.
12
.
10
Firewire IEEE 1394
software on your PC (see item 2. "Headzone
®
® Firewire Audio or "ASIO" Headzone
® Firewire.
on the base station.
1
.
13
to your PC or MAC.
8
® Software Installation").
you will be requested to do so during installation.
® Firewire.
- 13 -