Maintenance
To keep the headband and earpads clean use a damp cloth with
a gentle cleansing agent (such as washing-up liquid). Make sure
not to allow any water to enter the transducer elements. Do not
use any solvent cleaners.
The microphone pop-shield of the DT 108/109 headset can be
easily removed and washed in warm water. Please take care that
the pop shield is completely dry before it is replaced.
The fully modular design of the DT 100 and the DT 108/109
allows field replacement servicing without the need for
specialist tools. The order numbers of the spare parts are listed
under "Spares".
In the unlikely event of equipment failure, the product should be
returned to your beyerdynamic dealer.
Safety
We strongly recommend that the headphone or headset is
plugged into the drive amplifier before you put them on. This will
give the technician the chance to check that the volume levels are
not too high.
Be aware that the very low levels of distortion can make listening
levels higher than is perceived. Please take into consideration,
that too high level hearing may lead, after considerable time, to
irrevocable hearing damage.
Models
DT 100
Studio headphone, black, with K 100.07 cable
(stereo jack 6.35 mm), 3 m, plug-in type
DT 108
Single-ear headset, black
DT 109
Headset, black
Spare Parts
BN 59-18/A
EDT 100 S
EDT 100 P
EDT 100 T
BN 56-79/A
12
16 Ω . . . . . . . . . . . . . . . . . . . . . . . Order # 474.177
400 Ω . . . . . . . . . . . . . . . . . . . . . . Order # 421.464
200/50 Ω . . . . . . . . . . . . . . . . . . . Order # 402.958
200/400 Ω . . . . . . . . . . . . . . . . . . Order # 402.966
200/50 Ω . . . . . . . . . . . . . . . . . . . Order # 402.974
200/400 Ω . . . . . . . . . . . . . . . . . . Order # 402.982
Headband pad . . . . . . . . . . . . Order # 108.715
Ear pads, soft PVC . . . . . . . . . Order # 907.003
Ear pads, plush . . . . . . . . . . . . Order # 945.576
Ear pads, cotton jersey . . . . . . Order # 945.584
Pop shield (5 pcs., supplied
with DT 108/109) . . . . . . . . . . Order # 108.677