Connectors - Seh Inu-100 Hardware-Installationsanleitung

Connectors

power supply 1
(You can find this circuit diagram on the INU server's side.)
Power supply
The INU server can be fed by 2 power supplies. While one
power supply is actively supplying, the other serves as
backup.
WARNING
The INU server and the power supply or power
supplies must be installed in the same control
cabinet. And the low-voltage cable between the
power supply or power supplies and the INU
server must not be longer than 3 m.
Power supply
connection:
Hardware Installation Guide
normally
closed
power supply 2
1: Connectors 1 + 2
2: Connectors 3 + 4
via screw terminals
[en]
normally
open
5