Safety Regulations - Seh Inu-100 Hardware-Installationsanleitung

 Safety Regulations
INU servers are network devices for use in industrial
environments. The INU-100 is designed for the integration of
USB devices into TCP/IP networks.
Important:
Before starting the installation and the initial
setup procedure as well during the operation of
the INU server, please note the following safety
regulations. Their purpose is to protect yourself
and others from personal injuries, and avoid
damage to the equipment.
• Read the documentation and make sure that your system
meets the requirements listed therein.
• The device must only be connected to the mains and to
the network by qualified personnel.
• Avoid contact with humidity or liquids.
• The device must only be connected and operated if it is in
perfect condition.
• Do not connect a telephone cable to the RJ-45 connector.
The RJ-45 connector may only be connected to SELV volt-
ages. For the connection to the RJ-45 connector only STP
cabling (category 5 or better) may be used. The shielding
must fit flushly to the connector.
• Do not open the housing. Unauthorized modifications to
the device can affect the product certification and are for-
bidden.
• Only use a certified USB cable (< 3 m) listed at
www.usb.org.
• The device and the power supply or power supplies must
10 [en] Hardware Installation Guide