Thermalright Macho 120 Rev.A Handbuch Seite 15

Step 5:
1
3
Step 4 : Anchoring Mount Installation
Place the Anchoring Mount on the Screw Nuts.
Use the four M3L6 Screws to fix the Anchoring
Mount on to the Screw Nuts.
Step 7:
Step 7: Mounting Plate Installation
Place the Heatsink Body on top of the CPU.
Make the Mounting Plate go through the Heatsink
Body. Then use the supplied Screw Driver
to fasten the two M3L6 Screws to Secure the
Mounting Plate.
Step 9:
Step 9 : Fan Installation
Place the included 120mm fan onto the Heatsink
Body. And then secure it with the 120mm Fan
Clips, by pulling the Fan Clips to place the four
ends at the four holes on the 120mm Fan.
The Ultimate Cooling Solutions!
4
2
Step 6:
Step 6 : Applying Thermal Paste
Apply the Thermal Paste to the base of the
Heatsink and the surface of the CPU evenly.
Step 8:
Step 8: Easy Access
Pass the supplied Screw
Driver through the central
hole of the Heatsink Body,
for easier access to the M3L6
Screw underneath the cooler.
Step 10:
Step 10 : Installation completed
Plug in the fan connector to the CPU PWM Fan
socket on the motherboard. Installation complete.
www.thermalright.com
12