Thermalright Macho 120 Rev.A Handbuch Seite 11

Macho 120 Rev.A
Step 4:
Step 4 : Applying Thermal Paste
Apply the Thermal Paste to the base of the Heatsink and the surface of the CPU evenly.
Step 5:
Step 5: Mounting Plate Installation
Place the Heatsink Body on top of the CPU. Make
the Mounting Plate go through the Heatsink Body.
Then use the supplied Screw Driver to fasten the
two M3L6 Screws to Secure the Mounting Plate.
Step 7:
Step 7 : Fan Installation
Place the included 120mm Fan onto the Heatsink
Body. And then secure it with the 120mm Fan
Clips, by pulling the Fan Clips to place the four
ends at the four holes on the 120mm Fan.
The Ultimate Cooling Solutions!
Step 6:
Step 6: Easy Access
Pass the supplied Screw
Driver through the central
hole of the Heatsink Body,
for easier access to the
M3L6 Screw underneath
the cooler.
Step 8:
Step 8 : Installation completed
Plug in the fan connector to the CPU PWM Fan
socket on the motherboard. Installation complete.
www.thermalright.com
8