6 End of Work
After finishing the job remove mains plug and wind up connection lead. Store aspirator until
next use in a dry, frost-free room.
7 Care, Maintenance, and Repairs
All works must be performed carefully.
Maintenance work, as well as repairs of any kind, must only be carried out by authorised
service stations or by specialists in compliance with all relevant safety regulations.
At the beginning of all care, maintenance, and repair works the mains plug must
be pulled out!
The cowl may only be cleaned with a dry or slightly moistened cloth (if necessary, with
addition of meek detergents). The intrusion of water must be completely excluded.
Rinse tank with clear water and soft brush and rub it off well with a dry cloth. Do not close the
tank so that all parts can dry up correctly. Screw out suction hose, check floor nozzle and
suction tube for larger dirt depositions or constipation, clean if necessary.
Check suction hose for leaks or kinks.
Regularly check power cords and plug connections and the fender on the rocker switch for
damage.
8 General Recommendations
Exchange expendable parts in time
Use original columbus parts and accessories only
The columbus expert adviser will help you in all cleaning problems
9 Technical Data
Rated voltage
Nominal consumption
Mains connecting lead
Air flow max.
Low pressure max.
Tank capacity
Dimensions
Weight
Checks
Protection class
Technical improvements preserved.
10 Accessories
We keep in stock special accessories for your several cleaning tasks:
Electric aspiration brush, floor aspiration nozzles, aspiration hoses, paper dust-bags, micro
filters.
SW 2000plus
230V / 50 Hz
1100 W
12 m
54 l/s
210 mbar
28 l
Ø 41 x 50 cm
8,5 kg
CE
II
SW 3000
230V / 50 Hz
1100 W
12 m
54 l/s
210 mbar
44 l
Ø 41 x 63 cm
10 kg
CE
II
11