Yamaha WR450F Fahrer- Und Wartungshandbuch Seite 594

1
2
1
3
2
5 - 45
HANDLEBAR
11. Install:
Clutch cable 1
G
Hot starter cable 2
G
NOTE:
Apply the lithium soap base grease on the
clutch cable end and hot starter cable end.
12. Adjust:
Clutch lever free play
G
Refer to "CLUTCH ADJUSTMENT"
section in the CHAPTER 3.
Hot starter lever free play
G
Refer to "HOT STARTER LEVER
ADJUSTMENT" section in the CHAP-
TER 3.
13. Fasten the hot starter cable 1 and clutch
cable 2 with a clamp 3.
14. Insert the end of the fuel breather hose
1 into the hole in the steering shaft cap
2.
CHAS