Remote Control; Network - Yamaha BRX-610 Bedienungsanleitung

■ Picture
Problem
Screen freezes and
operation buttons do
This unit needs to be restarted.
not work.
Video is not output Resolution is set incorrectly.
with the desired
resolution.
Wide-screen video Aspect ratio of your TV is set incorrectly.
appears vertically
stretched, or black
bands appear at the
top and bottom of the
screen. Or 4:3 video
appears horizontally
stretched.
Square noise
(mosaic) appears on
the screen.
The playback screen The disc is a copyright-protected disc.
will be disturbed if
DVD video is
recorded to a VCR, or
played back through
a VCR.

Remote control

Problem
The remote control The remote control is operated outside its
does not work nor operation range.
function properly.
The remote control sensor on this unit is
exposed to direct sunlight or lighting.
The battery is worn out.
There are obstacles between the sensor of
this unit and the remote control.

Network

Problem
Cannot connect to Incorrect cable connections.
the Internet.
The connected equipment is turned off.
Connections of the broadband router and/
or modem are incorrect.
The network setting is incorrect.
Cause
Press
Turn off the power and turn on the power again.
Press and hold
seconds to restart this unit.
Set to the desired resolution.
Change the aspect ratio of your TV.
Blocks in images may be visible in scenes with rapid
movement due to the characteristics of digital image
compression technology.
This unit complies with analog copy protection.
Some discs contain a copy prohibiting signal. If you
try to play back such discs through a VCR, or record
to a VCR and play back the signal, the copy
protection will prevent normal playback.
Cause
For information on the remote control operation
range, refer to
Change the lighting or orientation of this unit.
Replace the battery with new one.
Remove the obstacles.
Cause
Connect the Network cable properly.
Turn on the connected equipment, such as the
broadband router or modem.
Connect the broadband router and/or modem
correctly.
Set the proper value(s) in the network setting. Refer
to "Network".
Remedy
, then restart playback.
on the front panel for around 5
Remedy
"Using the remote control"
Remedy
TROUBLESHOOTING
Page
—
—
—
37
37
—
—
Page
10
.
—
10
—
Page
15
—
—
36
47
En