Before Proceeding, Make Sure That The In- Sert Is Fixed To The Base - EdilKamin PELLKAMIN 10 Installations-, Betriebs- Und Wartungsanleitung

EXTRACTION OF THE INSERT
To extract the insert, proceed as follows:
CAUTION:
BEFORE PROCEEDING, MAKE SURE THAT THE IN-
SERT IS FIXED TO THE BASE
• Open the door and lift the slide lock (F – Fig. 5).
• Attach the handle provided to the two pins fi xed to the lower
grille (G - fi g. 6) and pull the insert towards you as far as it will
go (fi g. 7).
• Using the handle (G – Fig. 6), pull the insert towards you
until it stops (Fig. 7).
INSTALLATION
fi g. 5
fi g. 6
fi g. 7
- 42
-
F
G