Connections - Silvercrest SBW 60 A1 Bedienungs- Und Sicherheitshinweise

Connections

Connect to HDMI ARC (Audio Return Channel)
The ARC (Audio Return Channel) function, allows you to send audio input from your ARC-compliant TV to
ARC-compliant audio devices (e.g. soundbar) without the need to connect an audio cable.
To enjoy the ARC function, make sure the main unit the HDMI (ARC) socket is connected with the HDMI
cable (included) to the HDMI (ARC) socket of your ARC-compliant TV. Then, just use your TV remote
control to adjust the volume output (VOL +/– and MUTE) of the connected audio device.
Note:
• Your TV must support the HDMI-CEC and ARC and the HDMI-CEC and ARC must be set to On.
• The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC
function, please refer to the owner's manual.
• Ensure that you use an HDMI cables that can support the ARC function.
• HDMI-CEC will be called different names by different manufacturers – please refer to your owner's
manual for details on setting up HDMI-CEC and ARC.
Connect to OPTICAL socket
Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (not included) to the
TV's OPTICAL OUT socket and the OPTICAL socket on the unit.
32 GB/IE
HDMI (ARC)
OPTICAL